B9Creator Version 1.2

B9Creator Version 1.2 Printer troubleshooting documentation.

B9Creator Troubleshooting - First Steps
B9Creator Troubleshooting – First Steps Find the category describing the issue you are experiencing and implement the recommended resolution(s). New ...
Tue, Jun 4, 2019 at 2:34 PM
B9Creator Print Issues
B9Creator Print Issues If your printer has not been setup, complete the setup process per the Instructional Videos. Print the Calibration Print (vid...
Fri, Jun 21, 2019 at 8:44 AM
B9Creator Windows 10 Computer Display Settings
B9Creator Computer Display Settings The following setup is for Windows 10.  Please visit Instructional video Operating System Display Setup for earlier ...
Mon, Jun 3, 2019 at 2:06 PM
B9Creator Projector Tuning Process
B9Creator Printer Tuning Process This document explains the recommended procedure to properly calibrate your B9Creator v1.2 3D printer to print at th...
Thu, Jan 17, 2019 at 11:08 AM
B9Creator Projector Troubleshooting and Bulb Replacement
B9Creator Projector Troubleshooting and Bulb Replacement Summary The B9Creator projector bulbs are tungsten filament.Therefore, lifetime can vary from ...
Tue, Jun 4, 2019 at 2:25 PM
B9Creator X Axis Movement Issues
B9Creator X Axis Movement Issues                1. Check and clean the X-axis sensor.                                                               ...
Mon, Jun 3, 2019 at 3:02 PM
B9Creator Home Sensors Test
B9Creator Home Sensors Test Remove the Vat to prevent potential pinch damage. Go to Settings>Printer Calibrations>Functional Printer and...
Fri, Aug 10, 2018 at 3:58 PM
B9Creator Build Table Calibration Process (using resin)
B9Creator Build Table Calibration Process Summary This document explains the process to calibrate the B9Creator Build Table. Things to Know The purp...
Thu, Jan 17, 2019 at 11:06 AM
B9Creator “Command: A061 Failed” Resolution
B9Creator “Command: A061 Failed” Resolution If you receive Command: “A061 Failed” error code Complete the following process. This procedure will man...
Wed, Mar 20, 2019 at 4:08 PM
B9Creator Z Axis Motor Problems
B9Creator Z Axis Motor Problems 1. Run Gold arm all the way up and down to feel for any catching. 2. Unscrew the gold arm from the back-lash nut. ...
Mon, Jun 11, 2018 at 10:56 AM