Core Series

Core Series Post Printing and DuraVat Cleaning Procedures
Post Print and DuraVat Cleaning Procedure for Recharging, Cleaning and Curing   For best quality prints at thinner Z resolution settings, it is necessa...
Wed, Dec 5, 2018 at 3:25 PM
Core Series FAQ
C- Create Software D – Documents P - Printer S - Support   Question Answer C What do I need to do when the printer does not automatically show up ...
Fri, Mar 8, 2019 at 10:28 AM
Core Series 530, 550 Users Manual
Core Series 530, 550 Users Manual
Thu, May 24, 2018 at 8:24 AM
Core Series Roughness on Print - Interior Glass Cleaning
Core Series Cleaning the Optical Glass Overview The Core series printers utilized a precision light engine and optical glass to achieve high detail prints...
Wed, Oct 24, 2018 at 9:13 AM
Orientation, Support and Design Guidelines
Orientation, Support and Design Guidelines   TABLE OF CONTENTS   Producing precise 3d models Jewelry     Creative CADWorks Guide to Jewelry Supports ...
Mon, Mar 18, 2019 at 4:10 PM
Core Series Updating the Printer Firmware
Follow the steps below to ensure the current version of the firmware on your B9 Core Series. When the Printer and PC running the B9Create Software are N...
Sun, Apr 8, 2018 at 6:43 AM
B9Create not Connecting to Printer
Wi-Fi Connection Problems Overview This document describes three potential scenarios preventing the Printer from connecting to Wi-Fi. Once connected, t...
Thu, Apr 5, 2018 at 10:05 AM
Core Series Print Remnant Stuck on DuraVat Surface
Core Series Removing a Print Stuck to the DuraVat Surface Occasionally, a print may become stuck to the DuraVat surface and cannot be removed with the micr...
Tue, Jul 3, 2018 at 12:51 PM
Core Series Lines or swirls patterns on prints
Issue: Lines on models are often called grow lines associated with high resolution DLP 3D printing on non vertical surfaces. Using DLP technology, the ...
Fri, Mar 8, 2019 at 1:25 PM
Core Series Printer Operational Issues
Issues: "Print Aborted" message Printer freezes during printing operation. This may be a print issue, Verify the issue can be reproduced using ...
Thu, Apr 12, 2018 at 4:35 PM